Wood gasifier with CHP 75 kW
The Wood gasifier with CHP and 75 kW output was developed to better cover the output spectrum below 100 kW. The output can be regulated between 55 and 78 kW. A filter was added to the 50 kW system and equipped with a 6-cylinder gas engine from MAN. The co-current fixed-bed gasifier and the long-life gas filters result in very high system reliability with low maintenance and operating costs. Space is provided for additional catalytic converters to comply with future emissions standards.
The system is controlled by a modern PLC, from the wood chip feed to the heat extraction and electricity feed-in. The system can be operated and monitored locally or via smartphone over the internet.
wp2.075
Wood chip CHP 75 kW
Wood chip CHP units with 75 kW are ideal for agriculture and forestry, hotels with wellness areas, businesses and small reheating networks with corresponding energy requirements. With our innovative technology, we have developed a future-oriented system for decentralized energy supply. A step towards independence from third-party providers while making optimum use of local resources.
Output & efficiency of the CHP 75 kW
efficiency
Dimensions and space requirements
In addition to the specified dimensions, a minimum distance of 1.2 meters is recommended between the system modules and the building walls. This facilitates access to the systems and guarantees efficient maintenance work.
- Gasification Unit (L x W x H)
2.6 x 1.5 x 2.3 m
- CHP Unit (L x W x H)
2.5 x 1.1 x 1.9 m
- Required room height min.
2,8 m
- Floor space approx.
25 m²
Performance data
All data are to be understood as guide values and when using a fuel in accordance with the wood chip specification.
- Electrical output 3x400V (max.)
78 kW
- Thermal output (water circuit 90°C)
145 kW
- Nominal fuel capacity of wood chips
278 kW
- Electrical efficiency
28%
- Thermal efficiency (water circuit 90°C)
52%
- Ideal water content of wood chips
7%
- Wood chip consumption per day (spruce/fir)
7.5 srm
- Wood chip consumption per day (beech)
5.1 srm
- Own power consumption (without drying)
2.2 kW
- Power adjustability range
70-100%
Technological advantages
- Overall solution: wood chip drying and sieving, gasification unit, CHP unit and charcoal disposal
- Operation with standard wood chips incl. fines and bark (according to specification)
- Very high system availability
- High electrical efficiency
- Minimal self-consumption of electricity (approx. 3% of output el.)
- Maintenance-friendly and compact design with little space requirements
- Low maintenance due to high-quality components
- No condensates and residues other than charcoal
- All system components / functions are integrated into one control system
- Complete documents for official approval procedures
- Service and remote maintenance, spare parts in stock
- Warranty
Installation, commissioning & maintenance
The two units (DC Gasifier and CHP) are mounted on a base frame and delivered ready for operation. We guarantee short installation times and rapid commissioning.
Thanks to the high-quality components and good accessibility, the maintenance costs of the systems are comparatively low. We offer individual services and contracts tailored to your framework conditions.
Further Components & Services
System control
The system can be operated and monitored locally, via smartphone or via the internet from anywhere in the world. Warning and fault messages are sent by email or SMS.
Wood Chip Dryer
Perfect wood chips for an optimal pyrolysis process and high efficiency. A specially developed wood chip drying system with integrated screening.
Plant Service
Our systems are designed to be low-maintenance and easily accessible. Wear parts and spare parts are kept in stock and are delivered by parcel service or express courier. We offer customer-specific service and maintenance contracts.